Loading...

Land Rover Discovery ABS Relays

Land Rover Discovery Abs relays

Starting at low prices, AutoBuffy stocks multiple ABS relays from top OE-quality brands to fit the Land Rover Discovery. The ABS relay is a small electrical switch that controls power delivery to the anti-lock braking system module. When it fails, your ABS loses power entirely, disabling the system that prevents wheel lockup during hard braking and increasing stopping distances on slick roads.

Signs your Land Rover Discovery needs a new ABS relay

  • ABS warning light stays on continuously after startup and does not turn off during normal driving
  • ABS system is completely unresponsive — wheels lock up during hard braking where ABS would normally activate
  • Traction control or stability control warning lights illuminate at the same time as the ABS light, since they share the same relay circuit on many vehicles
  • Fuse for the ABS circuit blows repeatedly, which can indicate the relay is drawing excessive current
  • No clicking or audible self-test from the ABS pump motor during initial startup as you would normally hear
  • Diagnostic scan shows ABS module power supply fault codes or 'no communication with ABS module' errors

Which ABS relay should you buy for your Land Rover Discovery?

Most Land Rover Discovery owners need to match the relay to the exact fuse/relay box position and amperage rating — an ABS relay is not universal, and the wrong amperage can blow fuses or fail prematurely. Your main decision is between an OEM-equivalent direct-fit relay and a standalone generic relay of the same type. Check your owner's manual or relay box lid for the correct amperage before ordering.

OEM-equivalent direct-fit relay
Best for
Owners who want guaranteed fit and original specifications
What you get
Exact plug-and-play replacement matching factory amperage, terminal layout, and housing dimensions
OEM dealer relay
Best for
Owners under warranty or requiring certified parts for insurance or legal reasons
What you get
Factory part with full OEM backing, typically the highest cost option
High-quality aftermarket relay
Best for
Budget-conscious owners comfortable cross-referencing specs
What you get
Lower price with comparable performance when amperage and terminal type are verified to match
Relay + fuse combo kit
Best for
Owners whose ABS relay failure also damaged the associated fuse or fuse box terminal
What you get
Replacement relay paired with correct-amperage fuses, reducing the chance of a repeat failure

Replacing the ABS relay on a Land Rover Discovery

Easy15–30 minutesRelay puller or needle-nose pliersFlathead screwdriver (to open fuse box cover)OBD-II scan tool (to clear any stored fault codes after replacement)Owner's manual or fuse box diagram (to confirm relay position)

Open the underhood fuse box, locate the ABS relay using the box cover diagram or owner's manual, and pull the old relay straight out using a relay puller or needle-nose pliers. Press the new relay firmly into the same socket until it seats completely, then start the vehicle to confirm the ABS warning light has turned off. If fault codes were stored, clear them with a scan tool and perform a short test drive to allow the ABS system to complete its self-check.

Frequently asked questions

How much does it cost to replace ABS relays on a Land Rover Discovery?
The part itself starts at low prices at AutoBuffy. Professional labor is typically minimal — most shops charge under one hour of labor to locate and swap a relay since it requires no disassembly beyond accessing the fuse/relay box. DIY replacement is straightforward and can eliminate the labor cost entirely.
Can I drive my Land Rover Discovery with a bad ABS relay?
You can drive short distances, but it is not advisable. A failed ABS relay disables the entire anti-lock braking system, meaning your wheels can lock during emergency stops, especially on wet or icy pavement. Your regular brakes still function, but you lose the critical safety benefit ABS provides. Replace the relay as soon as possible.
How do I know if my Land Rover Discovery has a bad ABS relay versus a bad ABS module?
Start by checking the relay and its fuse before assuming the module is faulty. Swap the ABS relay with an identical relay from another position in the fuse box as a quick test — if the ABS warning light goes off, the relay was the problem. A scan tool showing 'no module communication' combined with a relay swap test helps confirm which component has failed.
Where is the ABS relay located on the Land Rover Discovery?
On most vehicles, the ABS relay sits inside the underhood fuse and relay box, sometimes called the power distribution center. Some models place it in a secondary fuse box near the firewall or alongside the ABS module itself. Consult your owner's manual or the diagram printed on the fuse box cover to find the exact position for your Land Rover Discovery.
Will replacing the ABS relay clear the ABS warning light on my Land Rover Discovery?
If a failed relay was the sole cause of the fault, the warning light will typically turn off on its own once the new relay restores power to the ABS module. If the light remains on after replacement, a stored fault code may need to be cleared with a scan tool, or an additional underlying issue — such as a faulty wheel speed sensor — may be present.
Are ABS relays vehicle-specific or can I use a generic relay?
ABS relays must match the amperage rating and terminal configuration of your Land Rover Discovery's specific relay box position. Many share common relay formats used across the industry, so a generic relay of the identical amp rating and pin layout can work. However, always verify the specification against your owner's manual or a reliable parts fitment guide before purchasing a non-vehicle-specific unit.

More parts for your Land Rover Discovery

Abs relays for other Land Rover models