Loading...

Land Rover Range Rover Cup Holders

Land Rover Range Rover Cup holders

Cup holders for the Land Rover Range Rover start at low prices, with multiple options in stock from top OE-quality brands. A cup holder keeps beverages secure while driving, preventing spills onto electronics, upholstery, and controls. When the retaining ring cracks, the spring mechanism fails, or the insert breaks, drinks tip freely — a small failure with real interior-damage consequences.

Signs your Land Rover Range Rover needs a new cup holder

  • Drinks tip or slide freely instead of staying upright while the vehicle is moving
  • The spring-loaded arm or retaining ring is visibly cracked, broken off, or missing entirely
  • The cup holder insert rattles loudly against the console housing on every bump
  • The holder no longer collapses or folds back flush with the center console or door panel
  • Sticky residue or dried liquid has jammed the sliding or rotating mechanism so it won't open or close
  • The mounting tabs have snapped, causing the entire assembly to pull loose from the console or dashboard

Which cup holder should you buy for your Land Rover Range Rover?

The most important decision is whether you need the full housing assembly or just a replacement insert. Many Land Rover Range Rover cup holders use a two-piece design — a fixed outer shell and a removable inner insert — so identifying exactly which piece is damaged will save money. Position in the cabin also matters, since front-console, rear-console, and door-panel cup holders are not interchangeable.

OEM-equivalent replacement insert
Best for
Cracked or broken inner sleeve only; outer housing is intact
What you get
Drop-in fit, factory finish, restores grip and spring function without removing the console
Full cup holder assembly
Best for
Broken mounting tabs, damaged housing, or multiple failed components at once
What you get
Complete unit including housing, insert, and spring mechanism; longest-lasting repair
Front center console cup holder
Best for
Driver- or passenger-side primary position failure
What you get
Designed for high-use placement; typically includes adjustable-diameter retaining arms
Rear seat / fold-down armrest cup holder
Best for
Second-row or cargo-area position; common on SUVs and minivans
What you get
Often a self-contained panel that clips into the armrest; replaceable without console disassembly

Replacing a cup holder on a Land Rover Range Rover

Easy⏱ 15–45 minutesFlathead screwdriver or plastic trim pry toolPhillips-head screwdriverTrim clip removal toolNeedle-nose pliers (if retaining clips are recessed)

Most Land Rover Range Rover cup holder inserts unclip directly from the housing with hand pressure or a gentle pry — no console disassembly required. Full assembly replacements typically involve popping off the surrounding trim panel, removing one or two screws, disconnecting the old unit, and snapping or screwing the new assembly into place. Use a plastic pry tool throughout to avoid scratching the console finish.

Frequently asked questions

How much does it cost to replace cup holders on a Land Rover Range Rover?
Parts start at low prices for a replacement insert on the Land Rover Range Rover. A full assembly costs more but is still a low-cost repair overall. Labor is minimal since most cup holder swaps require no special tools and take under an hour, making this one of the more affordable interior fixes you can do yourself.
Can I replace just the cup holder insert on my Land Rover Range Rover, or do I need the whole assembly?
If the outer housing and mounting tabs are undamaged, you can replace only the insert on the Land Rover Range Rover. The insert is the removable inner ring or sleeve that contacts the drink. Pop the old one out, snap the new one in, and the repair is done in minutes without touching the console structure.
Are Land Rover Range Rover cup holders interchangeable between model years?
Not always. Land Rover may use the same cup holder design across several years of the Range Rover, but a mid-cycle interior refresh can change the housing shape or clip pattern entirely. Always match the part to your specific all model years build. Cross-reference your VIN or the part number stamped on the existing housing before ordering.
How do I keep a replacement cup holder from rattling on my Land Rover Range Rover?
Rattling usually means the insert is loose inside the housing or a mounting tab is not fully seated. Press the insert firmly until all clips click, and check that the housing screws or snap-pins are fully engaged with the console. A thin strip of foam tape between the insert and housing can eliminate residual vibration noise.
Is replacing a cup holder on a Land Rover Range Rover something I can do myself?
Yes — cup holder replacement on the Land Rover Range Rover is one of the most beginner-friendly interior jobs available. Most inserts unclip by hand or with a flathead screwdriver. Full assemblies may require removing a trim panel, but no cutting, splicing, or specialized knowledge is needed. See the install section below for a general overview.
What brands make cup holders for the Land Rover Range Rover?
AutoBuffy stocks several brands for the Land Rover Range Rover, including top OE-quality brands. OEM-equivalent suppliers focus on exact clip patterns and finish matching, while aftermarket options sometimes add features like rubber lining or adjustable sizing. For a like-for-like swap that blends invisibly with your interior, choose a part listed as OEM-spec for your all model years Range Rover.

More parts for your Land Rover Range Rover

Flame Trap HoseEngine Intake Manifold Cover GasketTie Rod EndCornering Light Wiring HarnessEngine Intake Manifold Temperature SensorHVAC Pressure TransducerABS RelayAir Charge Temperature Sensor Connector

Cup holders for other Land Rover models

Land Rover LR3Land Rover Range Rover SportLand Rover DiscoveryLand Rover LR2Land Rover Defender 110Land Rover LR4