Loading...

Land Rover Range Rover Washer Fluid Reservoir Mounting Grommets

Land Rover Range Rover Washer fluid reservoir mounting grommets

Starting at low prices, AutoBuffy stocks multiple washer fluid reservoir mounting grommets from top OE-quality brands. This small rubber isolator seats the washer fluid reservoir against the body or bracket, absorbing vibration and preventing the plastic tank from cracking. When it deteriorates, the reservoir shifts, leaks at its base, or rattles — eventually causing washer system failure.

Signs your Land Rover Range Rover needs a new washer fluid reservoir mounting grommet

  • Audible rattling or clunking from the reservoir area when driving over bumps or rough pavement
  • Washer fluid reservoir sits visibly crooked, tilted, or loose in its mounting location
  • Washer fluid leaking from the base or lower fittings of the reservoir due to stress on the tank
  • Reservoir mounting bolt or stud pulls through the grommet hole, leaving the tank unsecured
  • Cracked or brittle rubber visible around the mounting point, especially after years of heat cycling
  • Washer pump vibration is felt or heard more than usual because the reservoir is no longer dampened

Which washer fluid reservoir mounting grommet should you buy for your Land Rover Range Rover?

The main decision is material quality and fit: OEM-spec rubber grommets match the original durometer and hole diameter, while aftermarket options vary in stiffness and durability. Confirm whether your Land Rover Range Rover uses one grommet or a set, and check whether the grommet is sold individually or as part of a hardware kit.

OEM-equivalent rubber grommet
Best for
Owners who want a factory-match fit and feel
What you get
Correct durometer, precise hole diameter, reliable long-term vibration isolation
Aftermarket economy grommet
Best for
Budget repairs or high-mileage vehicles not kept long-term
What you get
Lower cost, functional fit, may be slightly softer or harder than OEM spec
Reinforced heavy-duty grommet
Best for
Vehicles driven on rough roads or in extreme heat/cold climates
What you get
Thicker rubber or rubber-over-metal construction for superior tear resistance
Full hardware kit (grommet + bolt/stud)
Best for
When the mounting hardware is also damaged or corroded
What you get
Complete fastener set ensures the entire mount is renewed in one purchase

Replacing the washer fluid reservoir mounting grommet on a Land Rover Range Rover

Easy⏱ 15–45 minutesSocket set or nut driverFlathead screwdriver or trim removal toolNeedle-nose pliersShop rags or a small drain pan

Drain or remove the washer fluid reservoir to access the mounting points, then press or pry the old grommet out of the reservoir tab or body bracket and seat the new one firmly until it is fully recessed and flush. Reinstall the reservoir onto the mounting stud or bolt, ensuring the grommet seats evenly without pinching. No significant torque is required — snug the fastener until the reservoir is stable with no side-to-side movement.

Frequently asked questions

How much does it cost to replace washer fluid reservoir mounting grommets on a Land Rover Range Rover?
Parts start at low prices for a single grommet on a Land Rover Range Rover. Labor is minimal — most shops charge less than half an hour of shop time since the repair involves removing one or two fasteners. Many owners replace the grommet themselves in a driveway with basic hand tools, keeping total cost very low.
Can I drive my Land Rover Range Rover with a broken or missing washer fluid reservoir mounting grommet?
You can drive short-term, but it is not advisable. Without the grommet, the reservoir vibrates against the body or bracket, which can crack the plastic tank, stress the washer pump hose connections, and eventually cause a fluid leak. A failed tank means no windshield washer function, which is a safety concern in poor visibility conditions.
How long do washer fluid reservoir mounting grommets last on a Land Rover Range Rover?
Most grommets last many years under normal conditions, but heat, road salt, and ozone cause rubber to harden and crack over time. Vehicles in hot climates or those frequently exposed to engine heat near the reservoir tend to see faster deterioration. Inspect the grommet whenever you service the washer system or replace the reservoir.
Is the washer fluid reservoir mounting grommet the same as the reservoir bushing?
They refer to the same part. Some manufacturers and parts catalogs list it as a bushing, isolator, or cushion depending on the vehicle. The function is identical: a rubber sleeve or collar that fits between the reservoir mounting tab and the body stud or bracket to absorb vibration and prevent metal-to-plastic contact.
Do I need to replace the washer fluid reservoir to fix the mounting grommet on my Land Rover Range Rover?
Not necessarily. If the reservoir itself is uncracked and the pump and hoses are intact, replacing only the grommet is sufficient and much less expensive. However, if the reservoir tab has cracked or deformed because it was left loose too long, the reservoir may need replacement at the same time to restore a secure mount.
How do I find the right washer fluid reservoir mounting grommet for my Land Rover Range Rover?
Use your Land Rover Range Rover year, make, and model to filter results — grommet hole diameter, outer diameter, and height vary by application. Cross-reference your reservoir part number if available, as some platforms list grommets by reservoir or submodel. AutoBuffy offers multiple options with vehicle-specific fitment filters to narrow the selection quickly.

More parts for your Land Rover Range Rover

Flame Trap HoseEngine Intake Manifold Cover GasketTie Rod EndCornering Light Wiring HarnessEngine Intake Manifold Temperature SensorHVAC Pressure TransducerABS RelayAir Charge Temperature Sensor Connector

Washer fluid reservoir mounting grommets for other Land Rover models

Land Rover FreelanderLand Rover LR4Land Rover LR2Land Rover LR3Land Rover DiscoveryLand Rover Range Rover Sport