Loading...
Starting at $13.95, AutoBuffy stocks 1 diesel fuel injector pump connectors from Standard Ignition. This electrical connector links the fuel injector pump to the vehicle's wiring harness, delivering the signal and power needed to time and control fuel delivery. A failed connector causes hard starts, rough running, or complete no-start conditions on your Lexus Is200T.
The main decision is whether to choose an OEM-spec replacement, a direct-fit aftermarket connector, or a universal pigtail connector that requires splicing. Fit, wire gauge, and terminal material are the factors that matter most — a loose or corroded terminal contact can reproduce the original failure within months.
| Option | Best for | What you get |
|---|---|---|
| OEM-Spec Direct-Fit Connector | Owners who want a plug-and-play repair with zero modification | Exact terminal count, wire gauge, and locking tab geometry matched to the Lexus Is200T factory harness |
| Aftermarket Direct-Fit Pigtail | Budget-conscious repairs where an OEM part is discontinued or overpriced | Pre-terminated wires with correct connector body; may vary slightly in wire length or jacket material |
| Universal Repair Connector Kit | Technicians repairing partial harness damage without replacing the full pigtail | Loose terminals, weatherproof seals, and connector shells sold separately for custom assembly |
| Remanufactured / Refurbished Connector | Low-mileage situations where the original connector body is sound but terminals are pitted | Cleaned and re-terminated original-style shells; availability varies by Lexus Is200T application |
Disconnect the battery negative cable before beginning work to prevent accidental pump activation or a short. Release the locking tab on the old connector and pull it straight off the pump; inspect the harness-side terminals for corrosion before installing the new connector. If the replacement is a pigtail, splice it to the harness using heat-shrink solder connectors or crimped weatherproof terminals rather than bare wire nuts, then verify a secure fit and confirm pump operation before reassembling any covers.