Loading...
Lexus IS500 Ignition Knock (Detonation) Sensors
Lexus Is500 Ignition knock (detonation) sensors
Starting at $27.95, AutoBuffy stocks 5 ignition knock (detonation) sensors from Beck/Arnley, Delphi, and GPD for the Lexus Is500. This sensor detects abnormal combustion—engine knock or ping—and signals the ECU to retard ignition timing before damage occurs. A failed sensor leaves the engine unprotected from detonation and typically triggers a check engine light.
Signs your Lexus Is500 needs a new ignition knock sensor
- Check engine light is on with stored codes P0325–P0334 (knock sensor circuit fault)
- Engine pings, knocks, or rattles audibly under acceleration or load, especially when using lower-octane fuel
- Noticeable loss of power or sluggish throttle response as the ECU aggressively retards timing to compensate
- Reduced fuel economy because retarded ignition timing makes combustion less efficient
- Hesitation or stumbling when accelerating uphill or towing, where knock risk is highest
- Failed emissions test caused by an engine running outside its optimized timing map
Which ignition knock sensor should you buy for your Lexus Is500?
The main decision is OE-equivalent quality versus budget aftermarket, and whether your Lexus Is500 uses one sensor or two (many V6 and V8 engines have separate sensors for each cylinder bank). Confirm the sensor connector style and thread pitch match your application before ordering, as these details vary even within the same Lexus lineup.
OE-Replacement (OEM-spec)
Best for
Drivers who want a direct, no-hassle swap that clears codes and stays cleared
What you get
Matched connector, correct resonant frequency, same sensitivity range as the factory unit
Premium Aftermarket (e.g., Beck/Arnley, Delphi, and GPD)
Best for
High-mileage vehicles or owners who want better warranty coverage than budget parts offer
What you get
Enhanced sealing, tighter tolerance piezoelectric element, multi-year warranty
Economy / Value Aftermarket
Best for
Short-term fix or vehicles with low remaining service life
What you get
Lower upfront cost, functional replacement, shorter warranty—verify fitment carefully
Bank 1 + Bank 2 Pair
Best for
V6/V8 Lexus Is500 owners replacing both sensors at once to avoid a repeat job
What you get
Matched sensors for both cylinder banks, saves labor on the second replacement
| Option | Best for | What you get |
|---|---|---|
| OE-Replacement (OEM-spec) | Drivers who want a direct, no-hassle swap that clears codes and stays cleared | Matched connector, correct resonant frequency, same sensitivity range as the factory unit |
| Premium Aftermarket (e.g., Beck/Arnley, Delphi, and GPD) | High-mileage vehicles or owners who want better warranty coverage than budget parts offer | Enhanced sealing, tighter tolerance piezoelectric element, multi-year warranty |
| Economy / Value Aftermarket | Short-term fix or vehicles with low remaining service life | Lower upfront cost, functional replacement, shorter warranty—verify fitment carefully |
| Bank 1 + Bank 2 Pair | V6/V8 Lexus Is500 owners replacing both sensors at once to avoid a repeat job | Matched sensors for both cylinder banks, saves labor on the second replacement |
Ignition knock (detonation) sensors brands we stock for your Lexus Is500
Beck/Arnley
1 option · from $98.95
Delphi
1 option · from $94.95
GPD
1 option · from $27.95
Motorad
1 option · from $100.95
Standard Ignition
1 option · from $110.95
Replacing the ignition knock sensor on a Lexus Is500
Moderate⏱ 1–3 hoursSocket set with extensions (metric and standard)Torque wrench (for proper sensor snugging—over-tightening alters sensitivity)Trim or hose pick for releasing the wiring harness connector clipPenetrating oil (if the sensor has been installed long-term)OBD-II scan tool to clear fault codes after installation
On many Lexus Is500 applications, the knock sensor is mounted on the engine block and accessible after removing only a heat shield or brace, making it a straightforward job. On others—particularly V6 and V8 engines—the sensor sits beneath the intake manifold, requiring significant disassembly that adds time and complexity. Always clear the fault codes with a scan tool after installation and run a short drive cycle to confirm the check engine light does not return.
Frequently asked questions
How much does it cost to replace ignition knock sensors on a Lexus Is500?
Parts start at $27.95 on AutoBuffy. DIY total cost is just the part plus any gaskets or hardware needed. A shop will add one to two hours of labor on top of the part price. Flat-mounted sensors are cheaper to replace; sensors buried under the intake manifold cost more in labor.
Can I drive my Lexus Is500 with a bad knock sensor?
You can drive short distances, but it is not recommended. The ECU will retard ignition timing as a precaution, reducing power and fuel economy. More importantly, if the sensor fails in a way that masks real knock events, undetected detonation can damage pistons, rings, and bearings over time.
Will a bad knock sensor cause my Lexus Is500 to fail an emissions test?
Yes, in most cases. A stored knock sensor fault code sets the check engine light and marks the OBD-II monitor as incomplete or failed. Most states will fail a vehicle with an illuminated check engine light or incomplete readiness monitors, so replacing the sensor is necessary before testing.
Do I need to replace both knock sensors on my Lexus Is500 at the same time?
Only if your Lexus Is500 has two sensors—common on V6 and V8 engines with a sensor per cylinder bank. If one has failed, the other is likely the same age and may follow soon. Replacing both during the same labor operation saves time and money if the intake manifold must be removed for access.
How long does an ignition knock sensor last on a Lexus Is500?
Knock sensors are solid-state and generally last many years, but they can fail prematurely due to heat cycling, coolant intrusion, or a damaged wiring harness. There is no scheduled replacement interval; they are typically replaced on-demand when a fault code appears or when symptoms of timing retard develop.
Will replacing the knock sensor improve my Lexus Is500's performance and fuel economy?
Yes, if a faulty sensor was causing the ECU to retard timing unnecessarily. Restoring the sensor allows the engine to run its optimal timing map, which recovers the power and fuel efficiency that was lost. The improvement is most noticeable during hard acceleration, highway cruising, and towing.