Loading...
Lexus NX300h Tail Light Assemblies
Lexus Nx300H Tail light assemblys
Starting at $141.95, AutoBuffy stocks 12 tail light assemblies from TYC to fit your Lexus Nx300H. The tail light assembly houses your brake, running, and turn-signal lights in one unit. When it cracks, fogs, or fails electrically, following drivers lose critical warning signals — a safety and legal issue that demands prompt replacement.
Signs your Lexus Nx300H needs a new tail light assembly
- One or more bulb sockets are dead even after installing a fresh bulb
- The lens is cracked, shattered, or missing — exposing internal bulbs to water and road debris
- Water or condensation pools inside the assembly and won't clear
- The lens has turned heavily yellowed or cloudy and significantly reduces light output at night
- A brake-light or tail-light warning appears on the dashboard or fails a brake-lamp test
- The turn signal on one side blinks faster than normal (hyper-flash caused by a broken circuit in the assembly)
Which tail light assembly should you buy for your Lexus Nx300H?
The main decision is whether to restore factory appearance with an OE-equivalent unit or upgrade to a smoked, LED, or sequential-signal style. Position also matters — driver-side and passenger-side assemblies are not interchangeable, and some Lexus Nx300H trims use a two-piece inner/outer design, so confirm your exact fitment before ordering.
OE-Replacement (halogen)
Best for
Restoring stock look and passing inspection
What you get
Direct bolt-on fit, standard amber or red lens, incandescent bulb sockets included
LED Upgrade Assembly
Best for
Brighter, faster brake-light response and modern look
What you get
Full LED light bar or cluster, longer bulb lifespan, plug-and-play on most applications
Smoked / Tinted Lens
Best for
Custom or sport appearance
What you get
Dark or blacked-out lens, same electrical layout as OE — check local lighting laws before installing
Sequential Turn Signal Assembly
Best for
Premium appearance and added visibility
What you get
LEDs that sweep outward on turn signal activation, requires compatible flasher relay on some vehicles
| Option | Best for | What you get |
|---|---|---|
| OE-Replacement (halogen) | Restoring stock look and passing inspection | Direct bolt-on fit, standard amber or red lens, incandescent bulb sockets included |
| LED Upgrade Assembly | Brighter, faster brake-light response and modern look | Full LED light bar or cluster, longer bulb lifespan, plug-and-play on most applications |
| Smoked / Tinted Lens | Custom or sport appearance | Dark or blacked-out lens, same electrical layout as OE — check local lighting laws before installing |
| Sequential Turn Signal Assembly | Premium appearance and added visibility | LEDs that sweep outward on turn signal activation, requires compatible flasher relay on some vehicles |
Tail light assemblys brands we stock for your Lexus Nx300H
TYC
12 options · from $141.95
Replacing the tail light assembly on a Lexus Nx300H
Easy⏱ 30–60 minutesTrim panel removal tool or flathead screwdriverPhillips and/or Torx screwdriver setSocket and ratchet setNeedle-nose pliers (for wiring harness clips)
On most Lexus Nx300H applications, the tail light assembly is secured by two to four bolts or screws accessible from inside the trunk or cargo area once the trim panel is pulled back. Disconnect the wiring harness, remove the fasteners, and pull the assembly straight out from the body. Reverse the steps with the new unit, reconnect the harness, and confirm all brake, running, and turn-signal functions before closing the trunk.
Frequently asked questions
How much does it cost to replace tail light assemblies on a Lexus Nx300H?
Parts start at $141.95 on AutoBuffy for a Lexus Nx300H tail light assembly. DIY replacement typically adds no labor cost and takes under an hour. Shop labor, if needed, usually runs one to two hours at local rates. Buying both sides at once often saves money versus replacing them separately later.
Can I drive my Lexus Nx300H with a broken tail light assembly?
No. A broken or non-functional tail light assembly on a Lexus Nx300H is illegal in every U.S. state and creates a genuine rear-end collision risk. Law enforcement can issue a fix-it citation, and in some states your vehicle will fail a safety inspection. Replace the assembly as soon as possible after the failure.
Do I need to replace both tail light assemblies at the same time on my Lexus Nx300H?
You are only required to replace the damaged side, but replacing both at the same time is often smart. Assemblies age together, so if one lens is cracked or yellowed the other likely is not far behind. Matching both sides also maintains uniform appearance and consistent light output across the rear of the Lexus Nx300H.
Will an aftermarket tail light assembly fit my Lexus Nx300H exactly like the original?
Quality aftermarket assemblies listed for your Lexus Nx300H are engineered to use the factory mounting holes, wiring harness connectors, and trim clips. Fit is typically direct bolt-on with no modification. Confirm the part is listed for your specific Lexus Nx300H trim level and body style, since the same model often has multiple tail light configurations across years.
How do I stop condensation from forming inside my Lexus Nx300H tail light assembly?
Condensation forms when the assembly seal deteriorates and allows moist air inside. A replacement assembly restores the factory seal and vent system. Temporary fixes like silicone sealant rarely hold long-term. If a brand-new assembly fogs immediately, check that the bulb access cover on the back of the housing is seated correctly and undamaged.
Is a tail light assembly the same as a tail light bulb on a Lexus Nx300H?
No. The tail light assembly is the complete housing — lens, housing shell, reflectors, and sockets. A bulb is a replaceable component that fits inside the assembly. If only a bulb has burned out, you can replace just the bulb. Replace the full assembly when the lens is cracked, the housing is damaged, or a socket has failed electrically.