Honda Element Rear Upper Control Arm (Camber Arm): What It Does, When to Replace It, and How to Choose
MaintenanceNov 16, 2026•7

Honda Element Rear Upper Control Arm (Camber Arm): What It Does, When to Replace It, and How to Choose

Everything Element owners need to know about the rear upper camber arm — symptoms, replacement cost, and how to pick the right part for 2003–2011 models.

By AutoBuffy Team

Share:

The Short Answer

The Honda Element rear upper control arm is the only adjustable camber point in the entire suspension — when it wears out, your tires pay the price, and it needs to be replaced and re-aligned before the damage spreads.

Quick-Reference FactsDetail
Vehicles covered2003–2011 Honda Element (all trims, FWD & AWD)
Also calledRear camber arm, upper lateral arm
Adjustable?Yes — rear upper only; front arms are NOT adjustable
Typical camber range-2.00° to +4.00° (aftermarket adjustable arms)
Part cost (per arm)~$40–$120 depending on brand
Alignment required after?Always — no exceptions
DIY difficultyModerate (1–2 hours, basic hand tools)

Why Do These Arms Fail — and When? The Element ran production from December 2002 through April 2011, making even the "newest" ones over a decade old at this point. Age alone is enough to condemn rubber bushings. The bushings inside the control arm absorb road vibration and allow controlled movement. Over time they:

  • Crack and harden from heat cycling and UV exposure
  • Develop voids that allow metal-on-metal slop
  • Compress unevenly, pulling camber out of spec without any obvious impact event

Ball joints (on arms that include them) wear from constant load cycling. And the arm itself can bend subtly from a hard pothole hit, a curb strike, or even a low-speed collision that didn't seem like a big deal at the time. Most Element owners don't notice until an alignment tech tells them camber can't be corrected, or until a tire is showing obvious inner or outer edge wear. ---

Symptoms: How to Tell If Yours Is Done

Don't wait for a tire to wear through to the cords. Watch for these:

  • Uneven rear tire wear — feathered edges, heavy wear on one side of the tread, or a rear tire that wears faster than the fronts
  • Clunking or knocking from the rear — especially over speed bumps, expansion joints, or rough pavement
  • Pulling to one side — particularly on highway sweepers or when braking
  • Rear end feels vague or "loose" — harder to describe but you'll notice it feels less planted than it used to
  • Failed alignment — the tech marks camber as "out of range" and can't bring it into spec

If you're seeing any combination of these, put the rear suspension on a lift and inspect the arms and bushings visually. Grab the arm and try to move it — there should be essentially no play. ---

Choosing the Right Replacement Arm

You've got a few decisions to make. ### Stock-Replacement vs. Adjustable

OEM-style arms drop in at the factory camber setting, which works fine if your subframe and surrounding geometry are straight and undamaged. Adjustable aftermarket arms — which include an eccentric or threaded adjuster — give your alignment tech the ability to dial in camber precisely, especially if adjacent components have shifted over the car's lifetime. For a vehicle this age, adjustable is often the smarter call. ### Brand Matters for Longevity

Not all aftermarket arms are built the same. The brands that hold up best share a few traits: quality bushing materials, tight tolerances on the arm itself, and hardware that doesn't corrode solid after one Ohio winter. MOOG is worth calling out here specifically. Their problem-solver series is well-regarded among professional installers for going beyond OEM specs — typically using upgraded bushing compounds and tighter manufacturing tolerances. If you want an arm you're not going to think about again for many years, that's a meaningful reason to spend a little more. MOOG control arm kits are available through AutoBuffy covering the Element's suspension needs. For budget-conscious repairs, there are competent baseline aftermarket options that will do the job — just be realistic that bushing life may be shorter, and factor that into your decision. ### FWD vs. AWD — No Worries Here

Good news: aftermarket rear upper control arms fit both FWD and AWD variants of the 2003–2011 Element. You don't need to source a different part based on drivetrain. ---

What Does Replacement Actually Cost? Here's an honest breakdown:

Cost ComponentTypical Range
Rear upper control arm (each)$40–$120
Shop labor (per side)$60–$120
Alignment (required)$80–$150
Total (one side, shop)~$180–$390
Total (DIY + alignment)~$120–$270

These are market ranges — use the part finder below for today's specific pricing on your year and configuration. One genuine opinion worth sharing: don't skip the alignment. I've seen too many people replace a control arm and then try to "save" the $100 alignment charge. Six months later they're buying a new rear tire that wore through in a crescent on the inside edge. The alignment isn't optional — it's what makes the repair complete. ---

DIY or Shop? The rear upper control arm swap is a reasonable DIY job for someone comfortable with suspension work. You'll need:

  • A floor jack and jack stands rated for the job
  • Breaker bar (those outer bolts can be stubborn)
  • Penetrating oil — seriously, apply it the day before on a car this age
  • Torque wrench for reinstallation

The bigger barrier is the alignment afterward, which requires a proper rack. Most tire shops and independent alignment shops can handle it same-day for a reasonable fee. Factor that into your planning — don't do the swap on a Friday night if you need the car Monday morning. ---

What About the 2029 Element Revival? Reports as of 2026 indicate Honda may bring back the Element as a hybrid around 2029. That's exciting for fans of the platform, but it doesn't change the math on your current vehicle. A worn camber arm costing $60–$100 in parts is still the right fix. Run your existing Element well and decide about the next one when it actually exists. ---

Why buy from AutoBuffy

  • Fitment check: add your vehicle and we confirm the part fits before you buy. If it doesn't fit because of our listing, you get a free return and a full refund, including original shipping.
  • 24-month limited warranty on new parts bought on autobuffy.com.
  • Real reviews: rated 4.9 by 19,069 verified customers.
  • 30-day returns on unused parts in the original packaging.
  • Free shipping on orders $50+. Orders placed before 12:00 PM ET (Mon-Fri) ship the same business day.
  • Questions about an order? Call 888-477-2530 or email help@autobuffy.com.

Find the right control arm for your Honda Element

Guaranteed fit, ships free

FAQ / People Also Ask

It connects the rear knuckle to the subframe and controls camber angle — how far the top of the tire leans in or out. On the Element, this arm is the primary (and only) adjustable camber point in the rear suspension.

Need Parts for Your Car?

Shop quality auto parts with guaranteed fitment.

Shop Auto Parts

Comments

Sign in to join the discussion — commenting requires a free AutoBuffy account.

Loading comments...

Comments are moderated by the AutoBuffy team.