Faq - Answer 1: Yes, this may be indicative of an alignment issue or a failed tensioner.
Faq - Answer 2: Yes, you may lose your power steering or stall out. Your car is not drivable when your drive belt fails.
Faq - Answer 3: Yes, the leading causes of belt failure are improper tension and misaligned pulleys. Both these conditions cause excessive heat which leads to belt failure. Have your belts checked every 3,000 miles f
Faq - Answer 4: No, when the belt backing has been torn or cracked, the belt should be replaced.
Faq - Answer 5: No, use the belt in the way it's listed in the ACDelco belts and hoses catalog.
Faq - Answer 6: No, remember the leading cause of belt failure is improper tension and misaligned pulleys. Improper tension will cause the belt to slip and you may notice a loss of performance from the air conditioni
Faq - Question 1: Could an automotive belt tear during use?
Faq - Question 2: Will I know immediately if an automotive belt tears?
Faq - Question 3: Are there steps I can take to ensure a longer automotive belt life?
Faq - Question 4: Is there a way to repair a torn automotive belt?
Faq - Question 5: Can I use the same automotive belt for multiple uses?
Faq - Question 6: Will a worn automotive belt affect gas mileage?
Features Benefits - Bullet 1: Its fiber loaded rubber stock puts more flexibility along the length of the belt, yet gives the belt greater lateral stability in the pulley
Features Benefits - Bullet 2: Has thermally active tensile cords that provide maintenance free performance when properly installed and tensioned
Features Benefits - Bullet 3: Manufactured with form ground to ensure precise top width and sidewall dimensional control for proper fit in the pulley as well as a smoother, quieter running belt
Good Maintenance Practices - Section 1 - Bullet 1: Do not use belt dressings to stop belt slippage or noise. These are oil based and may cause belt deterioration.
Good Maintenance Practices - Section 1 - Bullet 2: Never twist a belt more than 90 degrees during inspection. This may damage the tensile cords and cause premature failure.
Good Maintenance Practices - Section 1 - Bullet 4: Replace V-belts after 3 to 4 years, or every 36,000 to 48,000 miles.
Good Maintenance Practices - Section 1 - Bullet 5: Use an approved tension gauge to check belt tension.
Good Maintenance Practices - Section 1 - Bullet 6: Check for proper belt tension after 500 to 1,000 miles following belt installation. Recheck often, at least twice a year or every 6,000 miles.
Outside Circumference: 1717 MM
Product Description: ACDelco Professional, premium aftermarket V-Belts serve as replacement belts for today's most demanding engine drives. Due to thermal forces, these variable notched belts actually tighten on the drive
Signs Of Wear Troubleshooting - Section 1 - Bullet 1: Rubber Loss: (most common belt wear) a belt wear gauge measures rubber loss, which can result in reduced power transfer from the crank to the accessories.
Signs Of Wear Troubleshooting - Section 1 - Bullet 2: Glazing: shiny spots can indicate a slipping belt that isn't properly transferring power to accessories.
Signs Of Wear Troubleshooting - Section 1 - Bullet 3: Pilling: worn rubber can fill in grooves and cause noise, heat, vibration, and excessive wear.
Signs Of Wear Troubleshooting - Section 1 - Bullet 4: Abrasion: wear along the side could indicate misalignment due to a failed tensioner.
Signs Of Wear Troubleshooting - Section 1 - Bullet 5: Cracking: older neoprene belts crack as they near the end of their life cycle and often need to be replaced.
Signs Of Wear Troubleshooting - Section 1 - Bullet 6: Engine stops or backfires.
Signs Of Wear Troubleshooting - Section 1 - Bullet 7: The belt is producing a squealing noise.
Signs Of Wear Troubleshooting - Section 1 - Bullet 8: Headlights dim while driving.
Signs Of Wear Troubleshooting - Section 1 - Bullet 9: Loss of battery charge.
Top Cogged: No
Frequently Asked Questions
We're always here to help. If you can't find your answer, ask Rydon - our AI assistant will help you out.
What vehicles does this Accessory Drive Belt fit?
This ACDelco Accessory Drive Belt (Part #15673) fits specific vehicles. Use the compatibility checker on this page to verify fitment for your vehicle.
Is this an OEM or aftermarket part?
This is a premium aftermarket Accessory Drive Belt by ACDelco, designed to meet or exceed OEM specifications with strict quality control standards.
What warranty is included?
This ACDelco Accessory Drive Belt is backed by a 24-month limited warranty covering defects in materials and workmanship from date of purchase.
How long does shipping take?
Free standard shipping on all orders. Most orders ship within 1-2 business days and arrive within 3-5 business days.
Can I return this if it does not fit?
30-day money-back guarantee. Return unused parts in original packaging for full refund.
Product Specifications
Brand
ACDelco
Part Type
Accessory Drive Belt
Material
Fiber Loaded Rubber
Faq - Answer 1
Yes, this may be indicative of an a...
Part Number
15673
Effective Length
1702 MM
Color
Black
Faq - Answer 2
Yes, you may lose your power steeri...
Effective Length1702 MM
MaterialFiber Loaded Rubber
ColorBlack
Faq - Answer 1Yes, this may be indicative of an alignment issue or a failed tensioner.
Faq - Answer 2Yes, you may lose your power steering or stall out. Your car is not drivable when your drive belt fails.
Faq - Answer 3Yes, the leading causes of belt failure are improper tension and misaligned pulleys. Both these conditions cause excessive heat which leads to belt failure. Have your belts checked every 3,000 miles f
Faq - Answer 4No, when the belt backing has been torn or cracked, the belt should be replaced.
Faq - Answer 5No, use the belt in the way it's listed in the ACDelco belts and hoses catalog.
Faq - Answer 6No, remember the leading cause of belt failure is improper tension and misaligned pulleys. Improper tension will cause the belt to slip and you may notice a loss of performance from the air conditioni
Faq - Question 1Could an automotive belt tear during use?
Faq - Question 2Will I know immediately if an automotive belt tears?
Faq - Question 3Are there steps I can take to ensure a longer automotive belt life?
Faq - Question 4Is there a way to repair a torn automotive belt?
Faq - Question 5Can I use the same automotive belt for multiple uses?
Faq - Question 6Will a worn automotive belt affect gas mileage?
Features Benefits - Bullet 1Its fiber loaded rubber stock puts more flexibility along the length of the belt, yet gives the belt greater lateral stability in the pulley
Features Benefits - Bullet 2Has thermally active tensile cords that provide maintenance free performance when properly installed and tensioned
Features Benefits - Bullet 3Manufactured with form ground to ensure precise top width and sidewall dimensional control for proper fit in the pulley as well as a smoother, quieter running belt
Good Maintenance Practices - Section 1 - Bullet 1Do not use belt dressings to stop belt slippage or noise. These are oil based and may cause belt deterioration.
Good Maintenance Practices - Section 1 - Bullet 2Never twist a belt more than 90 degrees during inspection. This may damage the tensile cords and cause premature failure.
Good Maintenance Practices - Section 1 - Bullet 3Replace serpentine belts every 60,000 - 100,000 miles. Check vehicle's owner's manual.
Good Maintenance Practices - Section 1 - Bullet 4Replace V-belts after 3 to 4 years, or every 36,000 to 48,000 miles.
Good Maintenance Practices - Section 1 - Bullet 5Use an approved tension gauge to check belt tension.
Good Maintenance Practices - Section 1 - Bullet 6Check for proper belt tension after 500 to 1,000 miles following belt installation. Recheck often, at least twice a year or every 6,000 miles.
Outside Circumference1717 MM
Product DescriptionACDelco Professional, premium aftermarket V-Belts serve as replacement belts for today's most demanding engine drives. Due to thermal forces, these variable notched belts actually tighten on the drive
Signs Of Wear Troubleshooting - Section 1 - Bullet 1Rubber Loss: (most common belt wear) a belt wear gauge measures rubber loss, which can result in reduced power transfer from the crank to the accessories.
Signs Of Wear Troubleshooting - Section 1 - Bullet 2Glazing: shiny spots can indicate a slipping belt that isn't properly transferring power to accessories.
Signs Of Wear Troubleshooting - Section 1 - Bullet 3Pilling: worn rubber can fill in grooves and cause noise, heat, vibration, and excessive wear.
Signs Of Wear Troubleshooting - Section 1 - Bullet 4Abrasion: wear along the side could indicate misalignment due to a failed tensioner.
Signs Of Wear Troubleshooting - Section 1 - Bullet 5Cracking: older neoprene belts crack as they near the end of their life cycle and often need to be replaced.
Signs Of Wear Troubleshooting - Section 1 - Bullet 6Engine stops or backfires.
Signs Of Wear Troubleshooting - Section 1 - Bullet 7The belt is producing a squealing noise.
Signs Of Wear Troubleshooting - Section 1 - Bullet 8Headlights dim while driving.
Signs Of Wear Troubleshooting - Section 1 - Bullet 9Loss of battery charge.
Basic hand toolsTorque wrenchVehicle service manual
Frequently Asked Questions
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which are known to the State of California to cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts