Abs Tone Ring IncludedNo
Bolt Circle Diameter (In)4.5 in
Bolt Circle Diameter (Mm)114.3 mm
Center Bore Diameter (In)2.9in
Center Bore Diameter (Mm)73.5mm
Center Hole Diameter2.892 IN
Conventional Or Drum-In-Hat Type RotorConventional
Grade TypeRegular
Length (In)12.3 in
MaterialCast Iron
Max Bolt Hole Diameter (Mm)73.41mm
Mounting Bolt Hole Circle Diameter4.5 IN
Mounting Bolt Hole Diameter4.5 IN
Outside Diameter11.1 IN
Overall Rotor Diameter (Mm)281.94mm
Pitch Circle Diameter (Mm)114.3mm
Solid Or Vented Type RotorVented
Surface TypeSmooth
Bolt Hole Quantity5
ConstructionFull Cast
Disc Brake Rotor ConstructionVented
Disc FinishGround
Discard Thickness0.882 IN
Faq - Answer 1Yes, ACDelco also offers GM OE brake rotor and Advantage brake rotors.
Faq - Question 1Does ACDelco offer other grades of brake rotors?
Features Benefits - Bullet 1Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Features Benefits - Bullet 2Premium aftermarket replacement part
Features Benefits - Bullet 3Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Hat FinishTurned
Height (In)2.1 in
Height (Mm)52.2 mm
Includes Abs Sensor RingNo
Mounting Bolt Hole Quantity5
Nominal Thickness0.945 IN
Number Of Lugs5
Overall Height2.055 IN
Pad Contact Surface Width2 IN
Product DescriptionACDelco Gold (Professional) Non-Coated Disc Brake Rotors are a high quality alternative to Original Equipment (OE) parts. ACDelco Gold (Professional) parts are manufactured to meet your expectations f
Programming RequiredNo
Rust Resistant CoatingNo
Signs Of Wear Troubleshooting - Section 1 - Bullet 1Brake pedal pulsation (not to be confused with normal ABS operation).
Signs Of Wear Troubleshooting - Section 1 - Bullet 2Squealing or grinding noises.
Signs Of Wear Troubleshooting - Section 1 - Bullet 3Low brake pedal height.
Signs Of Wear Troubleshooting - Section 1 - Bullet 4Vehicle pulls to the left or right when brakes are applied.
Signs Of Wear Troubleshooting - Section 1 - Bullet 5Visible ridges or deep grooves on the rotor surface.
Signs Of Wear Troubleshooting - Section 1 - HeaderBrake rotor signs of wear include:
SlottedNo
Stud/Lug Hole Quantity5
Thickness (In)0.945 in
Thickness (Mm)24.003 mm
Weight14 LB
Width (In)12.3 in