Faq - Answer 1: No, but it is a good idea to inspect your brake shoes at each tire rotation.
Faq - Answer 2: Yes, it is a good idea to inspect your brake fluid often.
Faq - Answer 3: No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
Faq - Question 1: Do I have to replace my brake shoes after a certain amount of time?
Faq - Question 2: Do I need to check my brake fluid when replacing other brake parts?
Faq - Question 3: Do I have to replace all my brake parts when replacing my brake shoes?
Features Benefits - Bullet 1: Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
Features Benefits - Bullet 2: Quality validated for proper metallurgy and correct brake plate thickness
Features Benefits - Bullet 3: Non-directional brake surface finish for consistent braking
Features Benefits - Bullet 4: Available in riveted and bonded for various vehicle applications
Features Benefits - Bullet 5: Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage
Features Benefits - Bullet 6: Economical value with dependable quality
Features Benefits - Bullet 7: For General Motors vehicles as well as most makes and models
Good Maintenance Practices - Section 1 - Bullet 1: Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2: Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3: Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Header: The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1: Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2: Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3: Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Header: The following should be conducted by a qualified technician:
Height (In): 5 in
Product Description: ACDelco Silver (Advantage) Bonded Parking Brake Shoes are high-quality replacements for worn factory shoes. These bonded brakes deliver strong braking power while reducing noise and vibration. The cha
Programming Required: No
Signs Of Wear Troubleshooting - Section 1 - Bullet 1: Vehicle pulls to the left or right when brakes are applied.
Weight (Lb): 3 lb
Frequently Asked Questions
We're always here to help. If you can't find your answer, ask Rydon - our AI assistant will help you out.
What vehicles does this Parking Brake Shoe fit?
This ACDelco Parking Brake Shoe (Part #14807B) fits specific vehicles. Use the compatibility checker on this page to verify fitment for your vehicle.
Is this an OEM or aftermarket part?
This is a premium aftermarket Parking Brake Shoe by ACDelco, designed to meet or exceed OEM specifications with strict quality control standards.
What warranty is included?
This ACDelco Parking Brake Shoe is backed by a 24-month limited warranty covering defects in materials and workmanship from date of purchase.
How long does shipping take?
Free standard shipping on all orders. Most orders ship within 1-2 business days and arrive within 3-5 business days.
Can I return this if it does not fit?
30-day money-back guarantee. Return unused parts in original packaging for full refund.
Product Specifications
Brand
ACDelco
Part Type
Parking Brake Shoe
Brake Drum Diameter (Mm)
194 mm
Friction Material Attachment
Bonded
Part Number
14807B
Brake Drum Diameter (In)
7.638 in
Friction Material
Organic
Friction Material Composition
Semi-Metallic
Brake Drum Diameter (In)7.638 in
Brake Drum Diameter (Mm)194 mm
Friction MaterialOrganic
Friction Material AttachmentBonded
Friction Material CompositionSemi-Metallic
Length (In)9.8 in
Mounting Hardware IncludedNo
Brake Shoe Width (In)1.181 in
Brake Shoe Width (Mm)30 mm
Faq - Answer 1No, but it is a good idea to inspect your brake shoes at each tire rotation.
Faq - Answer 2Yes, it is a good idea to inspect your brake fluid often.
Faq - Answer 3No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
Faq - Question 1Do I have to replace my brake shoes after a certain amount of time?
Faq - Question 2Do I need to check my brake fluid when replacing other brake parts?
Faq - Question 3Do I have to replace all my brake parts when replacing my brake shoes?
Features Benefits - Bullet 1Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
Features Benefits - Bullet 2Quality validated for proper metallurgy and correct brake plate thickness
Features Benefits - Bullet 3Non-directional brake surface finish for consistent braking
Features Benefits - Bullet 4Available in riveted and bonded for various vehicle applications
Features Benefits - Bullet 5Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage
Features Benefits - Bullet 6Economical value with dependable quality
Features Benefits - Bullet 7For General Motors vehicles as well as most makes and models
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (In)5 in
Product DescriptionACDelco Silver (Advantage) Bonded Parking Brake Shoes are high-quality replacements for worn factory shoes. These bonded brakes deliver strong braking power while reducing noise and vibration. The cha
Programming RequiredNo
Signs Of Wear Troubleshooting - Section 1 - Bullet 1Vehicle pulls to the left or right when brakes are applied.
Basic hand toolsTorque wrenchVehicle service manual
Frequently Asked Questions
WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which are known to the State of California to cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts