Loading...

Toyota Prius Prime Complete Strut Sets

Toyota Prius Prime Complete strut sets

Starting at $308.95, AutoBuffy stocks 1 complete strut sets for the Toyota Prius Prime from brands including FCS. A complete strut set bundles the strut, coil spring, mount, and bearing plate into one ready-to-install unit. When struts wear out, your Toyota Prius Prime loses ride control and handling precision — increasing stopping distances and accelerating tire wear.

Signs your Toyota Prius Prime needs new struts

  • Nose dives noticeably forward under moderate braking, even on flat roads
  • Body continues to bounce or rock for several seconds after hitting a bump or dip
  • Steering feels vague, wanders, or requires constant small corrections at highway speed
  • Cupped or scalloped wear pattern appearing on the front tires
  • Clunking, knocking, or creaking noise from the front suspension over bumps or during turns
  • Visible oil streaking or leaking down the strut body when inspected under the vehicle

Which complete strut set should you buy for your Toyota Prius Prime?

The biggest decision is whether to match OEM ride quality or upgrade it. Complete strut sets come in several grades — the right choice depends on how you drive your Toyota Prius Prime and whether you prioritize comfort, handling, or value. Because the spring and mount are included, make sure the spring rate in the kit matches your vehicle's weight class and trim level.

Economy / Value
Best for
High-mileage vehicles or short-term ownership
What you get
Basic OEM-spec valving, adequate ride comfort, lowest upfront cost
OEM Replacement (Standard)
Best for
Restoring factory ride and handling on a daily driver
What you get
Matched spring rates, mounts, and bearings designed for your Toyota Prius Prime's weight and geometry
Loaded Performance / Sport
Best for
Drivers who want improved cornering and reduced body roll
What you get
Firmer valving, stiffer springs, upgraded mount hardware — trades some comfort for sharper handling
Heavy-Duty / Towing
Best for
Toyota Prius Prime used for towing, hauling, or carrying frequent heavy loads
What you get
Reinforced spring rates and heavier-duty strut body to prevent sag and bottoming out under load

Complete strut sets brands we stock for your Toyota Prius Prime

FCS
1 option · from $308.95

Replacing complete struts on a Toyota Prius Prime

Moderate⏱ 2–3 hours per axleFloor jack and jack standsImpact wrench or breaker barSocket and ratchet set (metric and standard)Torque wrenchPry bar

Because a complete strut set arrives pre-assembled with the spring already under load, no spring compressor is required — this is the primary reason the job is more approachable than a traditional strut replacement. The strut assembly unbolts from the knuckle at the bottom and from the strut tower at the top, and the new unit drops in using the same hardware. A wheel alignment must be performed after installation to restore proper suspension geometry.

Frequently asked questions

How much does it cost to replace complete struts on a Toyota Prius Prime?
Parts alone start at $308.95 for a complete strut set for the Toyota Prius Prime at AutoBuffy. Because the spring, mount, and bearing plate are pre-assembled, labor is typically lower than a traditional strut job — most shops charge one to two hours of labor per axle. Total installed cost varies by shop rate and region.
Should I replace struts in pairs or all four at once on my Toyota Prius Prime?
Replace struts in axle pairs at minimum — meaning both fronts or both rears together. Replacing only one strut creates uneven ride height, unbalanced handling, and unpredictable braking response. If one strut is worn, the one on the opposite side has the same mileage and is likely close to failure. Replacing all four at once is the most cost-effective approach.
What is a complete strut set versus a standard strut on the Toyota Prius Prime?
A standard strut is just the damper cartridge — you must reuse or separately source the coil spring, upper mount, and bearing plate. A complete strut set, sometimes called a 'loaded' or 'quick-strut' assembly, includes all those components pre-assembled. This eliminates the need for a spring compressor and significantly reduces installation time on your Toyota Prius Prime.
How long do struts last on a Toyota Prius Prime?
Strut lifespan on the Toyota Prius Prime depends heavily on road conditions and driving style. Under normal conditions, most struts remain functional for several years and tens of thousands of miles, but performance degrades gradually — often without obvious warning. Rough roads, potholes, and heavy loads shorten service life considerably. Inspect them any time you notice handling or ride quality changes.
Do I need a wheel alignment after replacing the struts on my Toyota Prius Prime?
Yes — a four-wheel alignment is strongly recommended after replacing struts on the Toyota Prius Prime. The strut is a structural part of the front suspension geometry. Even if the new assembly is installed identically, disturbing the strut can shift camber and caster angles. Skipping alignment risks accelerated tire wear and pulling or drifting while driving.
Are the FCS strut sets for the Toyota Prius Prime a direct fit?
Strut sets from FCS listed for your Toyota Prius Prime on AutoBuffy are application-specific and designed as direct-fit replacements. They are matched to your Toyota Prius Prime's year range of 2017–2019, with correct spring rates, mount bolt patterns, and overall extended length. Always confirm your trim level and any factory suspension packages before ordering, as these can affect spring rate selection.

Shop complete strut sets by year for the Toyota Prius Prime

201920182017

More parts for your Toyota Prius Prime

ABS Wheel Speed SensorWiper BladeEngine Timing Chain KitFuel Injection Throttle BodySide Marker Light AssemblyElectric Engine Water PumpEngine Crankshaft Position SensorEngine Timing Chain Guide

Complete strut sets for other Toyota models

Toyota StarletToyota SupraToyota PreviaToyota PaseoToyota PriusToyota Corona