Loading...

Toyota Starlet Side Marker Light Assemblys

Toyota Starlet Side marker light assemblys

Side marker light assemblies for your Toyota Starlet start at $18.95, with 2 options in stock from brands including TYC. These small amber or red lights mount on the front and rear corners of the body to make your vehicle visible to cross-traffic at night and in low visibility. A burned-out or cracked assembly triggers warning lights, fails inspection, and reduces your roadside visibility to other drivers.

Signs your Toyota Starlet needs a new side marker light assembly

  • The side marker bulb is out and replacing the bulb alone did not restore function — the socket or housing is faulty
  • The lens is cracked, yellowed, or missing, allowing moisture inside the housing and corroding the bulb socket
  • Water pooling inside the lens causes the bulb to blow repeatedly or flicker under vibration
  • The amber or red lens has faded to white or clear, reducing the colored output required for inspection compliance
  • The assembly tab or mounting clip is broken, causing the unit to rattle, sit crooked, or fall out of the body panel
  • Your Toyota Starlet fails a state safety inspection specifically citing an inoperative or damaged side marker light

Which side marker light assembly should you buy for your Toyota Starlet?

The main decision is whether to match OEM fit and appearance exactly or to accept a value-tier replacement. Position also matters — front assemblies are typically amber and rear assemblies are red, and they are not interchangeable, so confirm left/right and front/rear before ordering.

OEM-Equivalent (Direct-Fit)
Best for
Owners who want factory appearance and a plug-and-play install with no modifications
What you get
Exact lens color, housing shape, and connector match; meets DOT standards out of the box
Value / Economy Aftermarket
Best for
Budget repairs on high-mileage vehicles where cosmetic perfection is not a priority
What you get
Functional replacement at the lowest cost; fitment is correct but plastic and lens clarity may be lower grade
LED Upgrade Assembly
Best for
Owners who want brighter output and longer bulb life without bulb changes
What you get
LED light source built into the housing; draws less current and lasts longer, but verify hyper-flash compatibility
Smoked or Clear Lens (Style)
Best for
Enthusiasts modifying the exterior appearance of the Toyota Starlet
What you get
Non-standard lens tint; may not meet DOT marker color requirements in all states — check local regulations before purchasing

Side marker light assemblys brands we stock for your Toyota Starlet

TYC
2 options · from $18.95

Replacing a side marker light assembly on a Toyota Starlet

Easy⏱ 15–30 minutes per sideFlathead screwdriver or trim panel pry toolPhillips head screwdriverNeedle-nose pliersSocket and ratchet set (small sizes)

Most side marker assemblies on the Toyota Starlet are secured by one or two screws or by a snap-fit clip accessible from the outside of the bumper or fender. Disconnect the wiring harness connector, transfer the bulb to the new housing if it is not included, and press or fasten the new assembly into place until it seats flush. Verify the light operates correctly before finishing and confirm the lens sits tight against the body panel to prevent moisture intrusion.

Frequently asked questions

How much does it cost to replace side marker light assemblies on a Toyota Starlet?
Parts start at $18.95 for a single assembly on a Toyota Starlet. A shop will typically add 15–30 minutes of labor per side, making DIY replacement straightforward and cost-effective. Buying both sides at the same time is practical since wear and UV damage usually affect the pair equally.
Can I just replace the bulb instead of the whole assembly on my Toyota Starlet?
If the lens is intact and the socket tests good, a bulb swap is all you need. Replace the full assembly when the lens is cracked or cloudy, the socket is corroded, the housing is broken, or the bulb keeps blowing — the root cause is the housing, not the bulb.
Are front and rear side marker assemblies the same on a Toyota Starlet?
No. Front side markers must emit amber light and rear markers must emit red light per federal regulations. The housings are also shaped differently and mount in different locations. Always confirm front or rear, and driver or passenger side, when ordering a replacement for your Toyota Starlet.
Will a damaged side marker light cause my Toyota Starlet to fail inspection?
Yes. Most state safety inspections require all required lighting — including side markers — to be operational and the correct color. A cracked lens that changes the emitted color, a missing assembly, or a non-functioning unit are common inspection failure points. Replace it before your inspection date.
Do LED side marker assemblies cause hyper-flash on a Toyota Starlet?
They can if the Toyota Starlet uses a load-sensing turn signal flasher. LED assemblies draw significantly less current than incandescent bulbs, which the flasher may interpret as a burned-out bulb, causing rapid flashing. Installing a load resistor or an LED-compatible flasher relay corrects this problem.
How do I keep moisture out of a new side marker assembly on my Toyota Starlet?
Ensure the replacement assembly includes a factory-style gasket or seal between the housing and body panel, and that it seats fully flush. Do not overtighten mounting screws — distorting the housing cracks the seal. Some installers apply a thin bead of silicone to the gasket face for added protection in wet climates.

Shop side marker light assemblys by year for the Toyota Starlet

1981

More parts for your Toyota Starlet

Complete Strut SetAccessory Drive BeltAuxiliary Engine Cooling Fan AssemblyElectric Fuel PumpHVAC Blower MotorBrake Pad SetEngine Oil FilterBrake Caliper

Side marker light assemblys for other Toyota models

Toyota TacomaToyota Prius PrimeToyota PriusToyota 86Toyota Land CruiserToyota Tercel