Loading...

Ford Excursion Alignment Caster Kits

Ford Excursion Alignment caster kits

Starting at $8.95, AutoBuffy stocks 4 alignment caster kits from Mevotech Original Grade and Mevotech Supreme for the Ford Excursion. A caster kit adds or restores the forward/rearward tilt of the steering axis, letting you dial in proper caster angle after a lift, suspension repair, or collision. Without correct caster, the Ford Excursion will pull to one side, wander at highway speeds, and wear tires unevenly.

Signs your Ford Excursion needs a new alignment caster kit

  • Steering wheel pulls consistently to the left or right on a level road, even after a standard alignment attempt
  • Vehicle wanders or requires constant steering corrections at highway speeds
  • Steering wheel does not self-center after completing a turn
  • Uneven or feathered tire wear across the front axle that returns shortly after a fresh alignment
  • Shimmy or vibration felt through the steering column, especially between 45–65 mph
  • Technician reports caster angle is out of specification and cannot be corrected without correction hardware

Which alignment caster kit should you buy for your Ford Excursion?

The right caster kit depends on whether your Ford Excursion is stock height, lifted, or has suffered suspension damage that moved the control arm mounting points. Kits come in bolt-in cam bolt styles, eccentric bushing styles, and adjustable upper strut mount plates — each suits a different suspension design. Match the kit to your suspension type and the degree of correction you need before purchasing.

Cam Bolt / Eccentric Bolt Kit
Best for
Stock-height or mildly lifted Ford Excursion with slotted control arm holes
What you get
Offset cam bolts and washers that rotate within existing mounting holes to shift the axle fore or aft for caster correction
Adjustable Upper Control Arm (UCA) Kit
Best for
Ford Excursion with a lift kit or solid front axle where cam bolts alone cannot provide enough correction range
What you get
Fully adjustable upper arms with repositioned pivot points, offering a wider caster correction range than cam hardware alone
Eccentric Bushing / Insert Kit
Best for
Ford Excursion with press-fit control arm bushings and limited caster range, common on unibody platforms
What you get
Offset bushings pressed into the control arm or subframe to shift the pivot axis without replacing the entire arm
Caster / Camber Correction Plate Kit
Best for
Ford Excursion with a MacPherson strut front suspension that needs combined caster and camber adjustment
What you get
Slotted or multi-hole upper strut mount plates that allow the strut to be repositioned for simultaneous caster and camber correction

Alignment caster kits brands we stock for your Ford Excursion

Mevotech Original Grade
2 options · from $8.95
Mevotech Supreme
2 options · from $13.95

Replacing an alignment caster kit on a Ford Excursion

Moderate⏱ 1.5–3 hours (plus separate alignment time)Floor jack and jack standsBreaker bar and socket set (metric and SAE)Torque wrenchPry bar or pickle fork (for pressing bushings if required)Hydraulic press or bushing driver set (for eccentric bushing-style kits)

Raise and support the Ford Excursion safely, then remove the wheel to access the control arm or strut mounting hardware. Install the cam bolts, eccentric bushings, or correction plates per the kit instructions, snugging fasteners with the suspension at ride height to avoid bushing bind. Drive to an alignment shop immediately after installation so a technician can measure and set the final caster, camber, and toe angles to specification.

Frequently asked questions

How much does it cost to replace alignment caster kits on a Ford Excursion?
Parts start at $8.95 for a Ford Excursion caster kit at AutoBuffy. Add shop labor of roughly one to two hours for installation plus a full four-wheel alignment after the kit is set. Doing the installation yourself saves the labor charge, but a professional alignment is still required to confirm final angles.
What is caster angle and why does it matter on a Ford Excursion?
Caster is the fore-to-aft tilt of the steering axis when viewed from the side of the vehicle. Positive caster tilts the axis toward the driver and promotes straight-line stability and steering return-to-center. Incorrect caster on a Ford Excursion causes pulling, wandering, and reduced on-center feel that a standard toe or camber adjustment cannot fix.
Can I adjust caster on a Ford Excursion without a correction kit?
Only if the factory suspension already provides an adjustment slot or cam provision. Many Ford Excursion suspensions are fixed at the factory and offer no built-in caster adjustment. When the angle is out of spec — due to a lift, worn components, or collision damage — a dedicated caster correction kit is the only reliable way to restore proper geometry.
Do I need an alignment after installing a caster kit on my Ford Excursion?
Yes, always. Installing the kit sets the mechanical correction range, but the final caster, camber, and toe angles must be measured and confirmed on an alignment rack. Skipping the alignment after fitting a caster kit on a Ford Excursion risks uneven tire wear, a pulling steering wheel, and premature ball joint or tie rod wear.
Will a caster kit fix a pulling problem on my Ford Excursion?
A caster kit corrects pulling caused by unequal caster side-to-side, which is a common cause. However, pulling can also stem from unequal tire pressure, a worn wheel bearing, a sticking brake caliper, or road crown sensitivity. Confirm caster imbalance is the diagnosed cause before purchasing a kit for the Ford Excursion.
How long does a caster kit last on a Ford Excursion?
A quality caster kit is a geometry correction device, not a wear item, so the hardware itself does not have a set replacement interval. The cam bolts or bushings should last the life of the surrounding suspension components. Re-check alignment angles any time you replace control arms, ball joints, or struts on the Ford Excursion.

Shop alignment caster kits by year for the Ford Excursion

200520042003200220012000

More parts for your Ford Excursion

Ignition Lock CylinderABS Wheel Speed SensorEngine Coolant Water OutletEngine Cylinder Head Gasket SetSeat Memory Module ConnectorBrake RotorBody Wiring Harness ConnectorEngine Crankcase Vent Valve

Alignment caster kits for other Ford models

Ford Econoline WagonFord E-150 EconolineFord E-150Ford Econoline Super DutyFord E-150 Econoline Club WagonFord Explorer